Garmin G1000H Pilot's Manual page 30

SYSTEM OVERVIEW
STBY
ON
ALT
GND
VFR
CODE
IDENT
BKSP
IDENT
TMR/REF
NRST
MSG
CAS
CAS ↑
CAS
18
Selects standby mode (transponder does not reply to any interrogations)
Selects Mode A (transponder replies to interrogations)
Selects Mode C – altitude reporting mode (transponder replies to
identification and altitude interrogations)
Allows manual selection of ground mode in certain conditions
Automatically enters the VFR code (1200 in the U.S.A. only)
Displays transponder code selection softkeys 0-7
0 — 7 Use numbers to enter code
Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen
Removes numbers entered, one at a time
Activates the Special Position Identification (SPI) pulse for 18 seconds,
identifying the transponder return on the ATC screen
Displays Timer/References Window
Displays Nearest Airports Window
Displays the Message Window
CAS ↓
Figure 1-13 Top Level PFD Softkeys
WX LGND
Figure 1-14 INSET Softkeys
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
METAR
Press the BACK Softkey to return to
the top-level softkeys.
190-01255-00 Rev. A
MSG
MSG
MSG