Displaying Traffic Data - Garmin G1000H Pilot's Manual

Integrated flight deck pilot’s guide for the bell 407gx
Hide thumbs Also See for G1000H:
Table of Contents

Advertisement

HAZARD AVOIDANCE
The altitude difference between the requesting aircraft and other intruder aircraft is displayed above/below the
traffic symbol in hundreds of feet. If the other aircraft is above the requesting aircraft, the altitude separation
appears above the traffic symbol; if below, the altitude separation appears below. Altitude trend is displayed as
an up/down arrow (for speeds greater than 500 fpm in either direction) to the right of the target symbol. Traffic
symbols for aircraft without altitude reporting capability appear without altitude separation or climb/descent
information.

DISPLAYING TRAFFIC DATA

Traffic information can be displayed on the following maps (when TIS is operating):
• PFD Inset Map
• Navigation Map Page
• Traffic Map Page
Displaying traffic information (maps other than the Traffic Map Page):
1) Select the MAP Softkey.
2) Select the TRAFFIC Softkey to display traffic data.
When traffic is selected on maps other than the Traffic Map Page, an icon is shown to indicate the feature is
enabled for display.
Traffic Advisory
Off-Scale
Traffic Status
Banner Messages
"Non Bearing"
Traffic Advisory
346
Figure 6-84 TIS Traffic on the Navigation Map Page
Garmin G1000H
Pilot's Guide for the Bell 407GX
• Trip Planning Page
• Nearest Pages
• Active Flight Plan Page
Non-Threat
Traffic
Traffic
Advisory
Non-Threat
Traffic
Traffic
Display
Enabled
190-01255-00 Rev. A

Advertisement

Table of Contents
loading

Table of Contents