Garmin G1000H Pilot's Manual page 34

SYSTEM OVERVIEW
Viewing GPS receiver status information
1) Use the large FMS Knob on the MFD to select the Auxiliary Page Group (see Section 1.7 for information on
navigating MFD page groups).
2) Use the small FMS Knob to select GPS Status Page.
Selecting the GPS receiver for which data may be reviewed
1) Use the FMS Knob to select the AUX - GPS Status Page.
2) To change the selected GPS receiver:
a) Press the desired GPS Softkey.
Or :
a) Press the MENU Key.
b) Use the FMS Knob to highlight the receiver which is not selected and press the ENT Key.
Satellite Constellation
RAIM Softkey
22
Satellite Signal
Diagram
Information Status
Selected
Figure 1-18 GPS Status Page (RAIM or SBAS Selected)
Garmin G1000H
GPS Receiver
™ Pilot's Guide for the Bell 407GX
Status
RAIM
Availability
Prediction
Enabled
SBAS
Options
Satellite Signal
SBAS Softkey
Selected
Strength Bars
190-01255-00 Rev. A