Garmin G1000H Pilot's Manual page 268

FLIGHT MANAGEMENT
l) V4 is now loaded into the flight plan as shown in Figure 5-112.
5) Making V4 the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight SLN. The TO waypoint of the leg is selected in order to activate the leg.
c) Select the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-113. Note the TOP to
SLN leg is actually part of V4.
256
Figure 5-112 V4 is Loaded in the Flight Plan
Figure 5-113 Comfirm Active Leg
Garmin G1000H Pilot's Guide for the Bell 407GX
™
190-01255-00 Rev. A