Cover
TOC
3.2.1.3
PFD Options - Wind Vector
When selected, wind vector information is displayed on the PFD to the left of
the HSI. Four styles are available.
1. While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Wind Vector value.
2. Turn the small MFD knob to select the style and press ENT
Style 1
3. When a Wind Vector style is selected, a Wind Vector box with the chosen style
will be displayed to the left of the HSI on the PFD. When OFF is selected, the
Wind Vector box will not be displayed.
3.2.1.4
PFD Options - Nav Status
When selected, Nav Status information is displayed on the PFD either on the
top of the display (Style 1) or to the left of the HSI (Style 2).
1. While viewing the System Setup page of the AUX page group, press the small
MFD knob to activate the cursor. Turn the large MFD knob to highlight the
desired Nav Status value.
2. Turn the small MFD knob to select the style and press ENT
3-30
Style 2
Figure 3-41 Wind Vector Style
Garmin G500/G600 Pilot's Guide
.
Style 3
Style 4
.
190-00601-02 Rev. J