Garmin G1000H Pilot's Manual page 451

Disabling incoming call alerts:
1) With the AUX-TELEPHONE Page displayed, press the MENU Key on the MFD to display the Page Menu.
2) Turn either FMS Knob to place the cursor on 'Disable Incoming Call Alerts'.
3) Press the ENT Key. The voice and pop-up alert will not be displayed now when an incoming call is received.
OUTGOING CALLS
Voice calls can be made from the cockpit to an external phone through the Iridium Satellite Network.
To make a call from the cockpit using the Iridium satellite network:
1) Press the TEL Key on the audio panel.
2) Select the DIAL Softkey on the MFD. A display similar to Figure 8-80 will be shown.
3) Selecting the number softkeys on the MFD, enter 00 + country code + area code + phone number when calling
a non-satellite telephone system. Enter 00 + Satellite Country Code (shown in the following table) + phone
number when placing a call to another satellite telephone system.
190-01255-00 Rev. A
Figure 8-80 Initiating an External Call
Satellite System
Inmarsat
ICO
Ellipso
Iridium
Globalstar
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
ADDITIONAL FEATURES
Country Code
870
8810 or 8811
8812 or 8813
8816 or 8817
8818 or 8819
439