Garmin G1000H Pilot's Manual page 285

FLIGHT MANAGEMENT
21) Upon passing PYNON the approach procedure automatically becomes active. The approach may be activated
at any point to proceed directly to the IAF. In this example, the aircraft has progressed through the final
waypoint of the arrival and the flight plan has automatically sequenced to the IAF as the active leg, activating
the approach procedure (see Figure 5-137).
Figure 5-137 Approach is Now Active
Note: To manually activate the approach procedure, perform the following steps:
a) Press the PROC Key.
b) Turn the large FMS Knob to highlight 'ACTIVATE APPROACH' as shown in Figure 5-138.
c) Press the ENT Key to activate the approach.
Figure 5-138 Manually Activate Approach
190-01255-00 Rev. A Garmin G1000H Pilot's Guide for the Bell 407GX 273
™