Operation - Garmin G1000H Pilot's Manual

OPERATION

After power-up, the traffic system is in Standby Mode. The system must be in Operating Mode for traffic to
be displayed and for TAs to be issued.
Selecting the OPERATE Softkey allows the system to switch from Standby Mode to Operating Mode as
necessary. Selecting the STANDBY Softkey forces the unit into Standby Mode.
Switching from operating mode to standby mode:
On the Traffic Page, select the STANDBY Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select 'Standby Mode'.
2) Press the ENT Key.
Switching from standby mode to operating mode:
O n the Traffic Page, select the OPERATE Softkey
Or:
1) Press the MENU Key and turn the small FMS knob to select 'Operate Mode'.
2) Press the ENT Key. The system switches from Standby Mode to Operating Mode as necessary.
TRAFFIC MAP PAGE
The Traffic Map Page shows surrounding traffic data in relation to the aircraft' s current position and altitude,
without basemap clutter. Aircraft orientation is always heading up unless there is no valid heading. Map
range is adjustable with the RANGE Knob from 2 to 12 nm, as indicated by the map range rings.
The traffic mode and altitude display mode are annunciated in the upper left corner of the page.
190-01255-00 Rev. A Garmin G1000H Pilot's Guide for the Bell 407GX
™
HAZARD AVOIDANCE
359