Disable/Enable Iridium Transceiver - Garmin G1000H Pilot's Manual

ADDITIONAL FEATURES

DISABLE/ENABLE IRIDIUM TRANSCEIVER

Iridium telephone and data communications may be turned on or off by performing these simple steps.
Disabling/enabling telephone and low speed data services:
1) Turn the large FMS Knob on the MFD to select the AUX page group.
2) Turn the small FMS Knob to select REPORTS/DATA LINK.
3) If necessary, select the REPORTS Softkey. The AUX-REPORT STATUS Page is now displayed as shown in Figure
8-76.
Figure 8-76 Report Status Page
4) Press the MENU Key. The Page Menu window is now displayed as seen in Figure 8-77.
5) Turn the FMS Knob to select 'Disable Iridium Transmission' in the menu list.
Figure 8-77 Select Disable Iridium Transmission
6) Press the ENT Key. The Iridium transceiver is now disabled.
7) To enable the Iridium transceiver, repeat steps 1 through 4, then select 'Enable Iridium Transceiver'.
190-01255-00 Rev. A Garmin G1000H ™ Pilot's Guide for the Bell 407GX 435