Garmin G1000H Pilot's Manual page 479

PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by
selecting the PRESETS and MORE Softkeys. Then the preset channel can be selected directly and added to
the channel list for the Presets category.
Setting a preset channel number:
1) On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, select the PRESETS
Softkey to access the first five preset channels (PS1 - PS5).
2) Select the MORE Softkey to access the next five channels (PS6 – PS10), and again to access the last five
channels (PS11 – PS15). Selecting the MORE Softkey repeatedly cycles through the preset channels.
3) Select the SET Softkey.
4) Select any one of the (PS1 - PS15) softkeys to assign a number to the active channel.
Select SET
to Save Each
Preset Channel
Selecting the BACK Softkey, or waiting during 45 seconds of softkey inactivity, returns the system to the
top level softkeys.
VOLUME
Radio volume is shown as a percentage of full volume. Volume level is controlled by selecting the VOL
Softkey, which brings up the MUTE Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1) With the XM Radio Page displayed, select the VOL Softkey.
2) Select the VOL – Softkey to reduce volume or select the VOL + Softkey to increase volume. (Once the VOL
Softkey is selected, the volume can also be adjusted using the small FMS Knob.)
3) Select the MUTE Softkey to mute the audio. Select the MUTE Softkey again to unmute the audio.
190-01255-00 Rev. A
Figure 8-111 Accessing and Selecting XM Preset Channels
Figure 8-112 Volume Control
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
ADDITIONAL FEATURES
Select PRESETS to
Access the Preset
Channels Softkeys
Select MORE to Cycle
Through the Preset
Channels
467