Engine Page - Garmin G1000H Pilot's Manual

3.3 ENGINE PAGE

Refer to the Rotorcraft Flight Manual (FRM) for engine operating limitations and corrective actions.
NOTE:
Pressing the ENGINE Softkey on the MFD accesses the EIS - Engine Page, which displays all engine, electrical,
fuel, alerts, and power assurance calculations. To return to the previous softkey level and exit the Engine page,
press the ENGINE Softkey again, or press the CLR Key, or turn the large FMS Knob. The Engine Page is not
available in reversionary mode.
ENGINE
Press the ENGINE Softkey again
to return to the top level softkeys.
ENGINE
• ENGINE
CAS
CAS
PWR CHK
* Softkey disabled until 19 or more alerts are displayed.
MFD Alerts
window
containing CAS
messages
Power Situation
Indicator
Dual
Tachometer
Engine Hour
Display
190-01255-00 Rev. A
CAS CAS PWR CHK
Figure 3-7 EIS Softkeys (MFD)
Displays the Engine page and softkeys; press again to return to the previous page
Scrolls up one message in the Alerts window on the MFD
Scrolls up one message in the Alerts window on the MFD
Performs a power assurance check
Figure 3-8 Engine Page Display (MFD)
Garmin G1000H
ENGINE INDICATION & CREW ALERTING SYSTEM
Pilot's Guide for the Bell 407GX
™
EIS Strip
87