Nav Receiver Manual Tuning - Garmin G1000H Pilot's Manual

AUDIO PANEL AND CNS
NAV radios are selected for listening by pressing the corresponding keys on the Audio Panel. Pressing the
NAV1,or NAV2 Key selects and deselects the navigation radio source. Selected audio can be heard over the headset
and the speaker (if selected). All radios can be selected individually or simultaneously.

NAV RECEIVER MANUAL TUNING

The NAV frequency controls and frequency boxes are on the left side of the MFD and PFD.
Manually tuning a NAV frequency:
1) Turn the NAV Knob to tune the desired frequency in the NAV Tuning Box.
2) Press the Frequency Transfer Key to transfer the frequency to the NAV Active Frequency Field.
3) Adjust the volume level with the NAV VOL/ID Knob.
4) Press the NAV VOL/ID Knob to turn the Morse code identifier audio on and off.
Turn VOL/ID Knob to adjust
volume. Press Knob to Turn
Morse Code On or Off.
Press the Frequency Transfer Key to
Transfer NAV Frequencies Between
Active and Standby Frequency Fields
Turn the NAV Knob to
Tune the Frequency in
the Tuning Box
108
Figure 4-18 Selecting a NAV Radio Receiver
Figure 4-19 NAV Frequency Tuning
Garmin G1000H Pilot's Guide for the Bell 407GX
™
190-01255-00 Rev. A