Transponder Mode Selection - Garmin G1000H Pilot's Manual

AUDIO PANEL AND CNS
0

TRANSPONDER MODE SELECTION

Mode selection can be automatic (Ground and Altitude Modes) or manual (Standby, ON, and Altitude Modes).
The STBY, ON, and ALT Softkeys can be accessed by pressing the XPDR Softkey.
Selecting a transponder mode:
1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Press the desired softkey to activate the transponder mode.
GROUND MODE
Ground Mode is normally selected automatically when the aircraft is on the ground. The transponder
powers up in the last mode it was in when shut down. Ground Mode can be overridden by pressing any one
of the Mode Selection Softkeys. A green GND indication and transponder code appear in the mode field of
the Transponder Data Box. In Ground Mode, the transponder does not allow Mode A and Mode C replies,
but it does permit acquisition squitter and replies to discretely addressed Mode S interrogations.
When Standby Mode has been selected on the ground, the transponder can be returned to Ground Mode
by pressing the GND Softkey.
118
STBY ON ALT
1 2 3 4
Figure 4-30 Transponder Softkeys (PFD)
Figure 4-31 Ground Mode
Garmin G1000H
™
XPDR
VFR CODE
GND
5 6 7
Pressing the BACK Softkey returns to the mode selection softkeys.
Pilot's Guide for the Bell 407GX
IDENT
IDENT BACK ALERTS
Pressing the BACK Softkey
returns to the top-level softkeys.
IDENT
BKSP BACK ALERTS
GND
Mode
190-01255-00 Rev. A