Garmin G1000H Pilot's Manual page 450

ADDITIONAL FEATURES
INCOMING CALLS
Outside callers should dial 00 + 8816 or 8817 + aircraft phone number when calling the aircraft
NOTE:
Iridium Telephone System.
When viewing MFD pages other than the AUX-TELEPHONE Page, a pop-up alert similar to Figure 8-79
will be displayed and an aural alert "Incoming Call" will be heard. The pop-up alert may be inhibited at
times, such as during takeoff. In addition to the pop-up alert, a ringing phone symbol will be displayed to
the right of the MFD page title as shown in Figure 8-79. Also, the voice alert "Incoming Call" will be heard
on the selected cockpit audio.
Incoming Call Pop-up
Answering an incoming call:
1) Press the TEL Key on the appropriate audio panel.
2) Select the ANSWER Softkey on the MFD.
Or :
While viewing the AUX-TELEPHONE Page:
The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
NOTE:
selecting the ANSWER Softkey, and stays active until the call is terminated.
1) Press the TEL Key on the appropriate audio panel.
2) Press the MENU Key to display the Page Menu.
3) Turn either FMS Knob to place the cursor on 'Answer Incoming Call'.
4) Press the ENT Key.
Selecting the IGNORE Softkey will extinguish the pop-up window and leave the current call unanswered.
Selecting the IGNRE ALL Softkey will extinguish the pop-up window for the current and all future incoming
calls and leave the current call unanswered. Selecting the TEL Softkey will display the AUX-TELEPHONE
Page allowing additional call information to be viewed before answering.
438
Figure 8-79 Incoming Call
Garmin G1000H ™ Pilot's Guide for the Bell 407GX
Incoming Call Symbol on MFD Page
190-01255-00 Rev. A