Garmin G1000H Pilot's Manual page 51

Renaming a profile:
1) While on the System Setup 1 or Setup 2 Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight 'RENAME' in the Pilot Profile Box.
3) Press the ENT Key.
4) In the 'Rename Profile' window, turn the FMS Knob to select the profile to rename.
5) Press the ENT Key.
6) Use the FMS Knob to enter a new profile name up to 16 characters long and press the ENT Key.
7) With 'RENAME' highlighted, press the ENT Key.
8) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
Deleting a profile:
1) While on the System Setup 1 or Setup 2 Page, press the FMS Knob momentarily to activate the flashing cursor.
2) Turn the large FMS Knob to highlight 'DELETE' in the Pilot Profile Box.
3) Press the ENT Key.
4) In the 'Delete Profile' window, turn the FMS Knob to select the profile to delete.
5) Press the ENT Key.
6) With 'DELETE' highlighted, press the ENT Key.
7) To cancel the process, use the large FMS Knob to select 'CANCEL' and press the ENT Key.
v c
Oice allOUts
Altitude voice callouts for the HTAWS system may be enabled or disabled using the System Setup 2
Page.
Disabling HTAWS voice callouts:
1) Turn the large FMS Knob to select the AUX Page group.
2) Turn the small FMS Knob to select System Setup.
3) If necessary, press the SETUP 2 Softkey select the System Setup 2 Page.
4) Press the FMS Knob momentarily to activate the flashing cursor.
5) Turn the large FMS Knob to highlight the Max Selected field.
6) Turn the small FMS Knob one click to the right to disable the first callout value. Each subsequent click to the
right disables the next callout.
190-01255-00 Rev. A Garmin G1000H ™ Pilot's Guide for the Bell 407GX
SYSTEM OVERVIEW
39