Input Selection; Zoom/Range - Garmin G1000H Pilot's Manual

Integrated flight deck pilot’s guide for the bell 407gx

Hide thumbs Also See for G1000H:

Table of Contents

INPUT SELECTION

While on the AUX - VIDEO Page, press the INPUT Softkey to select Input 1 or Input 2. The selected input

is displayed in the upper left of the video display.

Pressing the VID ZM + or VID ZM - Softkeys increases or decreases video display magnification between 1x

The RANGE Knob can be used to increase or decrease the range setting on the map display or zoom in and

out on the video display. While in the Split-Screen mode, pressing the MAP ACTV or VID ACTV Softkey

determines which display the RANGE Knob adjusts. Pressing the softkey to display MAP ACTV allows the

RANGE Knob to control the range setting of the map display. Pressing the softkey to display VID ACTV allows

the RANGE Knob to control the zoom setting of the video display.

When zooming in on the video display, a Zoom Window will appear in the upper right of the display. A box

within this window indicates the portion of the display currently being viewed. The currently displayed portion

of the full display may be adjusted by using Joystick.

190-01255-00 Rev. A

Figure 8-119 Zoom Window

Garmin G1000H

Pilot's Guide for the Bell 407GX

ADDITIONAL FEATURES