Energy Saving - NEC 1260 - SuperScript - Printer User Manual

Chapter 3 : SuperScript Software
Note: Jam recovery will not function if
you turn off the printer power before
clearing the paper jam.
Wait timeout–This setting defines the time that
the printer waits between blocks of data coming
from the computer before it considers the job
complete and processes what is in the print buffer.
The Wait timeout can be any time between 1 and
255 seconds. The Wait timeout default is 40 sec-
onds. For most text applications this is adequate.
If you plan on generating very complex pages,
you may want to increase the Wait timeout.
Manual Feed/Duplex timeout–This setting is
used to determine the length of time the printer
will wait for paper to be manually fed before pull-
ing paper from the cassette. It may be set to OFF
to tell the printer to wait indefinitely. The default
setting is 255 seconds and should be left on if the
printer is connected to a network.

Energy Saving

Checking Enable Energy Saving allows your
printer to reduce power consumption to a mini-
mum during inactive periods. It will set your
printer to power down after a specified time of
inactivity. This will save energy when you are not
using your printer. To "wake" the printer up press
the On Line button, press resume in the
3-24 NEC SuperScript 1260 User's Guide
maximized status monitor or send a print job to
the printer.
You can adjust the setting for the number of min-
utes before the printer powers down by entering
any number between 1 and 255 in the minutes
field.