Paper Properties - NEC 1260 - SuperScript - Printer User Manual

Paper that is not loaded in the printer tray, but has
been removed from its wrapper, should be stored
in a sealed plastic bag in a cool, dark place.
Use only the toner cartridge that has been
designed for the exclusive use of this printer.
Keep supplies out of the reach of children.

Paper Properties

Paper manufactured from 100% chemical wood
pulp containing no more than 25% cotton fiber is
recommended. Paper should be dust-free and
have cleanly cut edges. Do not use wrinkled,
curled, or damp paper; it often causes misfeeds,
paper jams, and illegible output.
Generally, paper manufactured for photocopying
has good print quality and paper handling
characteristics.
Note: Paper properties can be changed
by the manufacturers. NEC has no control
over such changes. Thus NEC neither
warrants nor recommends the use of any
particular paper and the user assumes all
responsibility as to the quality and
performance of paper selected.
Paper Properties
No matter which manufacturer you select, note
the following considerations.
• Smoother surface paper generates sharper
output resolution and detail.
• Coated paper can melt, discolor, or release
hazardous emissions at temperatures greater
than 392˚F (200˚C).
• The acceptable range of media weight for use
is 20 to 50 lb).
Note: The media weight limit for the
cassettes is 28lbs, but weights up to 50 lbs
can be used in the Multipurpose tray and
Face-up output tray.
Using print media that is not recommended may
cause paper jams or poor print quality.
A-3