Printer Administration - NEC 1260 - SuperScript - Printer User Manual

Printer Administration

Selecting the Printer Administration... button
brings up the following dialog box:
Consult your network administrator before
changing the settings in this box. The new settings
will take effect as soon as you press O.K.
Timeout Settings
Auto-continue–This setting determines how the
printer responds if it senses a complexity or
memory overflow error. Options are:
On: A printer message appears on the status
monitor, but printing continues. If the error
was due to complexity or memory overflow
after the problem page has been ejected from
the printer, the remainder of the document
may be printed depending on the error that
occurred. This is the default setting for the
SuperScript 1260 printer.
Off: A printer message appears on the
operator panel and Windows Status Monitor.
Printing stops until you correct the problem.
Note: When a SuperScript 1260 is
connected to a network, Auto-continue
should be set to On in order to prevent
jobs from backing up in the print queue.
Jam recovery–Jam recovery is a feature that
allows the printer to reprint a page after it has
jammed. Jam recovery can be set to On or Off (the
default). When it is set to On, the printer will
automatically attempt to reprint the lost page
after a jam is cleared.
The SuperScript 1260 will always reprint any page
incompletely imaged due to a paper jam. Turning
Jam recovery on will set aside memory so that the
printer may also be able to recover jammed pages
which have completed imaging.
Advanced Tab
3-23