NEC 1260 - SuperScript - Printer User Manual page 30

Chapter 2 : Operator Panel
Table 2-1: Condition Indications and Solutions (continued)
LEDs
Error (red) on Paper size mismatch
steady Paper source lights up
On Line (green) (MP or Cassette)
blinks
Error (red) blinks Adobe Memory
On Line (green) Booster used
on steady
MP Tray (amber) Waiting for Manual
on steady Feed
MP Tray (amber) No paper
blinks or
Cassette (amber)
blinks
Cassette (amber) Missing cassette
on steady
Toner (amber) on Low on toner
steady
2-6 NEC SuperScript 1260 User's Guide
CONDITION
This occurs after printing a page set for an incorrect paper length.
Corrective Action: Insert the correct paper size (in the cassette or
manual feed). The printer resumes normal processing. The document
must be reprinted.
This informs the user that Adobe Memory Booster was used.
See page 3–22 for more information.
This condition occurs when the printer is waiting for paper in the
Multi-purpose tray.
Corrective Action: Insert a sheet of paper into the Multi-purpose (MP)
tray. You may need to press the On Line button momentarily.
If the On Line button is pressed without supplying paper, the paper
will be picked from the paper cassette (if available).
This occurs when the cassette or Multi-purpose tray is out of paper.
Corrective Acton: Refill with correct size paper. Printer will resume
printing automatically.
The cassette is not installed.
Corrective Action: Installing cassette will automatically return
system to ready.
The toner level is low in the Toner cartridge.
Corrective Action: Redistribute the toner by removing the Toner car-
tridge and rocking it from side to side or replace the Toner cartridge.
CAUSE/SOLUTION