NEC 1260 - SuperScript - Printer User Manual page 45

The preview will display both the currently-
selected text watermark and any selected graphic.
However, you can change only the text in this
dialog box. The text in the preview will overlay
the graphic if the two overlap.
You may name your watermark in the Name field.
It will initially take the same name as the Text
field, but you can use any name up to16 charac-
ters in length.
Click OK to add the new watermark to the list on
the Watermark Options dialog.
To edit one of the watermarks on the list, from the
Watermark Options dialog box, highlight the
watermark you want to change. Click Edit to
bring up the Edit Watermark dialog box. The Edit
dialog box is similar to the Add Watermark dialog
box.
When your changes are complete, click OK.
Graphic Watermark
To create a graphic watermark, click Add in the
graphics area of the Watermark Options dialog
box. A graphic watermark can be any
uncomprepressed, valid bitmap (i.e. .bmp) file.
The Watermark Graphics dialog box will appear.
To select a bitmap to be used as a graphic water-
mark, enter the path or select browse to locate the
bitmap file.
You can name your graphic separate from the file
name in the Bitmap field. Use no more than 16
characters (in the Name field).
The preview will display both the currently
selected text and any selected bitmap. However,
you can change only the bitmap in this dialog box.
You may then change the darkness, scale and
position of your graphic watermark.
Press the OK button when done.
Setup Tab
3-9