NEC 1260 - SuperScript - Printer User Manual page 31

Table 2-1: Condition Indications and Solutions
LEDs
On Line (green) Ready
on steady
On Line (green) In use
blinks
On Line (green) Energy Saving
blinks slowly
On Line (green) Waiting
double-blinks
On Line Wrong paper size
(green)blinks
Cassette/Error on
steady
CONDITION
The printer is ready.
Note: Pressing the On Line button will take the printer offline.
The LED blinks while the printer is processing a job from your
computer or while finishing printer warm up and initialization. This
includes waiting for the computer to send additional data or for the
printer engine to move paper.
The LED blinks slowly while the printer is in Energy Saving Mode.
Energy Saving Mode starts after the printer has been READY as long
as specified by the Energy Saving Mode setting. The printer exits
Energy Saving Mode when it receives a job, or the On Line Button is
pressed.
PCL data left in the printer.
Corrective action: Pressing the On Line button will cause a Form Feed
then resume to Idle/Ready.
You have loaded a different sized paper in your paper cassette or tray
than specified.
Corrective Action: Press the On Line button once to manually feed the
correct paper size. Press the On Line button again to use paper from
the upper cassette. There is no size sensing in the Multi-purpose tray
or the optional Envelope cassette.
LED Operation
CAUSE/SOLUTION
2-7