NEC 1260 - SuperScript - Printer User Manual page 84

Chapter 5 : DOS Printing
Printer Control Options
The printer control options are shown below the
printer status information area. To perform an
action, type its letter as indicated on the screen.
P - Pause Printing
P
Pressing pauses printing. If a job is printing, it
will stop after the current page. If no job is
printing, the printer will not accept any more data
C
until you press for Continue.
Note: Pause printing is only available for
SuperScript 1260 printers that are
connected directly to your computer.
C - Continue Printing
If your printer has already been paused, or if it is
waiting for you to take some action, pressing
will continue (restart) the print job.
Note: Continue Printing is only available
for SuperScript 1260 printers that are
connected directly to your computer.
5-12 NEC SuperScript 1260 User's Guide
R - Resets Printer
R
Pressing
printer, which clears all data and downloaded
fonts from the printer's memory.
Note:
SuperScript 1260 printers that are
connected directly to your computer.
E - Ejects page
Pressing E
eject a page. This is useful, for example, if you do
a print screen from your computer.
X - Exits this menu
X
Pressing
C
sends a Reset command to the
Reset printer is only available for
sends a command to the printer to
^
or exits the DOS Status Monitor.