Memory Expansion Module (Simm) - NEC 1260 - SuperScript - Printer User Manual

Chapter 7 : Printer Options

Memory Expansion Module (SIMM)

SuperScript 1260 memory can be expanded by
adding 1MB, 4MB, or 16 MB SIMMs Single Inline
Memory Module (SIMM).
Adding the memory expansion module will solve
the memory overflow problem that causes
incomplete page printing and lessens resolution
fallback problems. Added memory will also
increase spooling capability in network printing.
The 72-pin SIMM is available from your local
dealer. You can use both parity and non-parity
DRAM SIMMs. Upgrade the printer memory by
installing 1MB, 4MB or 16MB SIMMs.
Follow these steps to install the memory
expansion module.
1. Turn off the printer power.
7-14 NEC SuperScript 1260 User's Guide
Note: To protect your printer from
possible damage make sure it is powered
down prior to installation of the module.
2. Pull the power cord from the rear panel of the
printer.
3. Remove the parallel cable connector from the
port and loosen the two finger tight screws on
the back.
Finger
Screws