Loading Transparencies And Adhesive Labels - NEC 1260 - SuperScript - Printer User Manual

Loading Transparencies and
Adhesive Labels
The Multi-purpose tray holds up to 40 transpar-
encies or adhesive labels: the 250-Sheet cassette
holds 50 transparencies.
Transparencies
When you are printing on transparency film,
always remove the first printed transparency
from the output tray before feeding a second
one through. This prevents scratching the film
surface of the first transparency. Only use
transparencies that are designed for laser
printers.
Adhesive Labels
NEC recommends that adhesive labels be fed
manually through the Multi-purpose tray.
However, they may also be loaded into the
paper cassette like regular paper.
Note: If you change media in the Multi-
purpose tray and you have selected
"Manual feed" as your paper source the
job may not continue printing until you
press the On Line button.

Loading Transparencies and Adhesive Labels

Adhesive labels consist of a top (print surface)
sheet, an adhesive layer, and a liner (peel-
away backing). Use labels that cover the entire
surface of the liner sheet. Labels placed on a
liner sheet with interrupting spaces make it
difficult for consistent feeding and may jam in
your printer.
Using the Multi-purpose tray, the image is
printed on the side facing up—so load
adhesive labels with the label side up, liner
side down.
Note: You should fan the sheets before
loading.
6-9