Change Printer Settings - NEC 1260 - SuperScript - Printer User Manual

Chapter 5 : DOS Printing

Change Printer Settings

The choices on this menu let you change a
number of your printer's internal settings. For
most users the default settings will be satisfactory.
Energy saving timeout
This setting lets you specify how long your
printer will wait without receiving data before
going into Energy Saving Mode. The default set-
ting is OFF. When you activate Energy Saving,
you can choose any value from 1 to 255 minutes.
The On Line light on your printer's front panel
will blink slowly when the printer is in Energy
Saving Mode. The printer will automatically
"wake" from Energy Saving Mode when it
receives a print job or the On Line button is
pressed.
5-6 NEC SuperScript 1260 User's Guide
Adobe Memory Booster
This option lets you turn Adobe Memory Booster
on or off. Adobe Memory Booster is an advanced
printer technology that effectively triples your
printer's memory, allowing you to print complex
documents that traditional printer architectures
would fail to print. The default setting is on and
we recommend that you leave this on. See page 3-
22 of this manual for more information.
Jam recovery
When jam recovery is turned on, the printer
reserves part of its memory so that it can reprint a
page if there is a printer jam. This causes printing
to be slower. The default setting is off.
Wait timeout
This setting determines how long the printer will
wait for data before ejecting a partially printed
page. You may want to set a longer time if you use
software that pauses for processing for extended
periods during printing (such as some database
programs). The default setting is 40 seconds. You
can deactivate the wait timeout by setting it to off.
Manual feed timeout
This setting determines how long the printer will
wait for you to insert paper from the Multi-
purpose tray when manual feed has been