Watermark Options - NEC 1260 - SuperScript - Printer User Manual

Chapter 3 : SuperScript Software

Watermark Options

A watermark is text and/or a graphic that is
superimposed on your final output, usually in a
lighter gray. Typical text watermarks are "Draft"
or "Confidential," but you can also create a water-
mark with your own text or graphic.
Pressing the Watermark Options button brings up
the Watermark Options dialog box.
You can choose a watermark from either of the
lists on the left. If <none> is selected, no water-
mark will print. As you move the highlight down
the list of watermarks, the preview area at the
3-8 NEC SuperScript 1260 User's Guide
right shows the text, size, and position of each
watermark on the page.
Text Watermark
To create your own text watermark, click Add in
the Text area of the Watermark Options dialog
box. The Edit Text Watermark dialog box will
appear.
Use this dialog box to enter the text and layout of
your watermark. You can set the watermark's
font, size, and darkness, as well as the angle and
position on the page. The preview area at the right
shows the effect of your settings.