IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual page 248

MRT COMPRESSION
MRT LOSSY COMPRESSION ACTIVE
NEW VALUES AT NEXT BOUNDARY
NONIPDS COAX
NONIPDS TWINAX
OFFLINE
ONLINE HEX PRINT
236
Infoprint 32 and Infoprint 40: User's Guide
Action: None required.
Meaning: The printer is compressing the page image it is currently
printing.
Action: None required.
Meaning: The printer is compressing the page image it is currently
printing. Check to make sure the output is acceptable.
Action: None required. To prevent page compression, turn page
protection on by setting the PAGEPROT menu item to ON. The
PAGEPROT menu item is available on the PCL Menu, the PostScript
(PS) Menu, and the IPDS Menu.
Note: Page protection works only if the printer has enough memory.
See "Memory Requirements" on page 8 for information on how
much memory various options require.
Meaning: You have taken the printer offline while a job was printing
in order to change a menu value. The new value might not take effect
until the next "job boundary". Different data streams, in particular
SCS, define job boundaries in different ways, so it may take a while
for the new value to take effect.
Action: None required. If problems occur, make sure you take the
printer offline to change menu values only when no jobs are printing
(the printer is in Ready state).
Meaning: The printer is receiving SCS or DSC/DSE data through the
coax interface.
Action: None required.
Meaning: The printer is receiving SCS data through the twinax
interface.
Action: None required.
Meaning: The printer is offline.
Action: Press the Online key to make the printer active.
Meaning: The printer is performing a hexadecimal dump.
Action: None required.