Table of Contents
Advertisement
Twinax SCS Menu
Item
TRAY 1
TRAY 2
TRAY 3
TRAY 4
TRAY 5
AUX
ENV
LPI
CPI
132
Infoprint 32 and Infoprint 40: User's Guide
Value
COR*
C-PORT
PORT
LAND
6*
8
0
3
4
nn.n
Specifies the default orientation for jobs printed from each
tray.
v TRAY 1 is the upper 500-sheet input tray on the printer.
v TRAY 2 is the lower 500-sheet input tray on the printer.
v TRAY 3 is the 500-sheet tray in the 2500-Sheet Input Unit.
v TRAY 4 is the left 1000-sheet tray in the 2500-Sheet Input
Unit. It is below Tray 3.
v TRAY 5 is the right 1000-sheet tray in the 2500-Sheet
Input Unit. It is also below Tray 3.
v AUXTRAY is the 50-sheet tray on the left side of the
printer.
v ENV is the optional envelope feeder.
Each input can be assigned one of the following default
orientations:
v COR—computer output reduction: Printing in landscape
with the logical page reduced to fit more data on the
physical page. The printer reduces vertical spacing and
uses a smaller font with less space between letters.
v C-PORT—compressed portrait: printing in portrait, but
with compression. Horizontal compression is supported
with 10 cpi only. The compression factor is fixed; it makes
it possible to print 80 characters per line on A4 paper and
85 characters per line on Letter paper.
v PORT—portrait: the page has normal, upright business
letter orientation.
v LAND—landscape: the page is wider than long.
Specifies a default lines per inch value. 0 specifies either the
value specified in the job, or the PCL default value for the
printer.
Specifies the default characters per inch, or pitch. nn can be
0, 5, 10, 12, 15, 17.1, 20, or 27. The default is 10.
Description
Advertisement
Table of Contents
