Memory Configuration (Memconfig) Menu - IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual

User guide
Table of Contents

Advertisement

Config Menu Item
PWRSAV
QUALITY
TONER LOW

Memory Configuration (Memconfig) Menu

Use the Memory Configuration Menu to define whether or not the printer
saves data stream information when it switches data streams. the following
table describes the settings you can change from the Memory Configuration
Menu. An asterisk (*) next to a value in the table indicates the factory default.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. If you do not have enough memory to support context saving (12 MB),
this menu will not appear. Larger paper sizes, page protection, and duplex
printing may further increase your memory requirements (see "Memory
Requirements" on page 8). To find out how much memory you have
installed, print a printer configuration page. See "Printing the Printer
Configuration Page" on page 25 for more information.
3. If you are unfamiliar with using the operator panel to work with menus,
please read "Using the Operator Panel Keys" on page 23 and "Navigating
Menus" on page 24 before continuing.
104
Infoprint 32 and Infoprint 40: User's Guide
Value
30 MIN*
1 HR
2 HR
3 HR
4 HR
OFF
15 MIN
NORMAL*
REFINE
ECONO
STOP*
CONT
Specifies how long the printer is inactive before it goes into
power-savings (sleep) mode. In this mode, the printer
powers down most of its systems and therefore requires
extra time to warm up when the next print is requested.
Specifies the print quality.
v NORMAL—normal quality. Use for text documents.
v REFINE—smooths edges. Use for documents that include
images, shading, and complex graphics.
v ECONO—reduces the amount of toner used in large
black areas, which saves toner.
Specifies whether or not to stop printing when the toner
cartridge is low on toner.
v STOP—stop printing.
v CONT—continue printing.
Note: To prevent loss of data, the printer stops when the
toner cartridge is empty.
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infoprint 32Infoprint 40

Table of Contents