16. Switch on the printer power and reset the fuser counter:
Cleaning the Printer
IBM recommends cleaning your printer approximately once per month.
1. Switch off the printer.
2. Unplug the printer.
3. Use a soft, damp cloth to carefully wipe the outside of the printer.
Attention: Do not use abrasive cleaners on the printer covers. Do not use
detergent solutions or other liquids on electronic components. Do not use
cleaners that contain ammonia.
4. Wipe the printer dry with a soft, dry cloth.
5. After removing a paper jam or replacing the toner cartridge, check the
inside of the printer. Remove any paper scraps and wipe off paper dust
a. Press the Online key until you see OFFLINE in the display.
b. Press the Menu key until you see MACHINE INFO MENU.
c. Press the Item key until you see FUSER CTR.
d. Press the Value key.
e. Press the Enter key.
Chapter 7. Maintaining the Printer
163