Table of Contents
Advertisement
8. Slide the paper tray back into the printer until it clicks into place.
Loading Paper into Tray 4 or Tray 5
Note
Many applications allow you to specify the input tray you want to use.
This value will override any value set at the printer. If your application
does not let you pick an input tray, use the Paper Menu to select the
tray.
To select Tray 4 or Tray 5, set SOURCE to TRAY 4 or TRAY 5 (see
"Selecting the Default Input Tray" on page 64).
Use the following procedure to load paper into the 1000-sheet paper trays
(Tray 4 or Tray 5):
1. See "Selecting Paper and Other Printable Material" on page 34 for
information on media you can load. Tray 4 and Tray 5 do not support SEF
printing. This illustration shows media in LEF orientation.
Simplex
LEF
(Long-edge feed)
Duplex
LEF
(Long-edge feed)
Chapter 4. Paper Handling
57
Advertisement
Table of Contents
