Loading Universal Envelopes Into The Envelope Feeder - IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual

4. Slide the size guide to the right until it lightly touches the edge of the
envelope stack.
Notes:
a. Make sure the envelope stack does not exceed the paper limit mark.
b. Adding envelopes while printing can cause paper jams.
5. Use your print application or the PAPER MENU to set the ENVSIZE item
to match the envelope size you loaded in the envelope feeder. Values
specified in print jobs override values you set at the printer.

Loading Universal Envelopes into the Envelope Feeder

Many applications allow you to specify the input tray you want to use.
This value will override any value set at the printer. If your application
does not let you pick an input tray, use the Paper Menu to select the
tray.
To select the envelope feeder, set SOURCE to ENVELOPE (see "Selecting
the Default Input Tray" on page 64).
See "Installing the Envelope Feeder" on page 189 for envelope feeder
installation instructions.
You can use the envelope feeder to print any envelope size that falls within
the following range:
Minimum:
3.87 x 7.5 in
98.4 x 190.5 mm
62
Infoprint 32 and Infoprint 40: User's Guide
Note