Table of Contents
Advertisement
COAX HEX PRT
COPY n OF nn
DO NOT POWER OFF
DSK FMT RESTART
FINISHER PAUSE
FORMAT DISK / IGNORE DISK
FLUSHING...
FORMATTING
F/W xxxxxxx
234
Infoprint 32 and Infoprint 40: User's Guide
Meaning: You are printing a hexadecimal dump for troubleshooting
problems with non-IPDS jobs sent over the coax attachment.
Action: To cancel the dump, select CANCEL CX PRT from the Test
Menu.
Meaning: You requested multiple copies of a print job. This message
increments with each copy the printer completes.
Action: None required.
Meaning: You sent a microcode update to the printer, which is
currently processing.
Action: None required.
Note: Do not power off the printer while this message displays.
Powering off could damage the printer.
Meaning: The printer is restarting to include a hard drive in its
configuration.
Action: None required.
Meaning: You pressed the Pause button on the 2000-Sheet Finisher.
The printer stops at the next job boundary.
Action: Press Pause again to resume printing.
Meaning: You are powering up with an unformatted hard drive, or
you selected the FORMAT DISK action on the Test Menu.
Action: Press the Value key to format the hard drive. Press the Shift
and Value keys simultaneously to continue as if there were no hard
drive installed.
Meaning: The printer is canceling a PCL5e or PostScript job.
Action: None required.
Meaning: The printer is formatting the hard drive.
Action: None required.
Meaning: Firmware error (xxxxxxx can be any alphanumeric value).
Advertisement
Table of Contents
