Ps Menu - IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual

User guide
Table of Contents

Advertisement

PCL Menu Item
AUTO RESET

PS Menu

Use the PS Menu to define the way the printer handles PostScript jobs. The
following table describes the settings you can change from the PS Menu. An
asterisk (*) next to a value in the table indicates the factory default.
Notes:
1. To select a new value, press the Enter key when the value is displayed in
the message display area. An asterisk (*) appears next to the value in the
message display area, indicating that it is now active.
2. Values set in PostScript print jobs (either by the print application or the
printer driver) override PS Menu values you set at the printer.
3. If you are unfamiliar with using the operator panel to work with menus,
please read "Using the Operator Panel Keys" on page 23 and "Navigating
Menus" on page 24 before continuing.
110
Infoprint 32 and Infoprint 40: User's Guide
Value
ON*
OFF
Specifies whether a PCL reset (reset of the PCL environment
and printing of any partial pages) occurs at the PORT
TMEOUT value.
v ON*—Reset occurs at the PORT TMEOUT values, which
are set on each printer attachment menu. All PCL
settings, such as orientation and paper source, will be
reset to the power-on default values. Downloaded fonts
that have NOT been designated as "permanent" will also
be lost. Partial pages, such as the last page of a job sent
without an end-of-forms command, will be ejected. The
default of ON is recommended for most situations.
v OFF—The above resets will NOT occur at the PORT
TMEOUT. This allows compatibility with applications
designed for HP printers with this behavior. It is not
recommended for users printing with Infoprint 32 or
Infoprint 40 drivers.
Notes:
1. When the printer actually switches to another port, the
PCL settings will be lost, regardless of the AUTO RESET
value.
2. AUTO RESET is NOT relevant to datastream switching.
If the printer switches datastreams before the PORT
TMEOUT, the PCL settings will only be saved if PCL
SAVE=YES. See "Memory Configuration (Memconfig)
Menu" on page 104.
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infoprint 32Infoprint 40

Table of Contents