Table of Contents
Advertisement
Coaxial SCS Menu
Item
APO
LPI
LINE SPACING
CPI
CASE
MPL
MPP
Value
ENABLE*
Enables or disables automatic print orientation.
DISABLE
v ENABLE—if the requested dimensions of the job fit on
v DISABLE—the page prints using the default orientation
Notes:
1. Values specified in the data stream override values set at
2. The factory defaults (orientation set to COR and
3. The requested dimensions are determined by the values
6*
Specifies a default lines per inch value for jobs received
8
over the coax attachment. Valid values are 0, 6, and 8. The
0
default is 6 lines per inch. 0 specifies either the value
specified in the job, or the PCL default value for the printer.
1*
Specifies single or double spacing:
2
v 1—single spacing
v 2—double spacing
nn.n
Specifies the default characters per inch, or pitch. nn can be
0, 10, 12, 15, 16.7, 20, or 27. The default is 10 characters per
inch. 0 specifies a proportional font (FGID 1452). Note that
proportional fonts use proportional spacing, which may
cause unexpected results (for example, tabular data may
appear misaligned).
DUAL*
Specifies the case of the printed text:
MONO
v DUAL—characters print in the case received
v MONO—all characters print in uppercase
nnn
Specifies the maximum page length (MPL) in lines per page.
Valid values are 0 to 255. 66 is the default.
nnn
Specifies the maximum print position (MPP). Valid values
are 0 to 255. 132 is the default.
the paper, the page is printed either in portrait or
landscape, whichever better fits the dimensions. If the
requested dimensions do not fit on the paper, the default
orientation for the tray (COR, PORT, LAND, or C-PORT)
determines how the sheet is printed.
for the tray (COR, PORT, LAND, or C-PORT).
the printer.
APO=ENABLE) give you the most flexibility.
of CPI, LINE SPACING, MPP, and MPL for the job.
These values can be set in the data stream or on the
Coaxial SCS Menu.
Description
Chapter 6. Operator Panel Menus
129
Advertisement
Table of Contents
