Table of Contents
Advertisement
Making Duplex or Simplex Printing the Printer Default
Situation: You want to set the printer default to either duplex or simplex
printing.
Action:
1. Press the Online key until you see OFFLINE in the display.
2. Press the Menu key until you see PAPER MENU in the display.
3. Press the Item key until you see DUPLEX=ON or DUPLEX=OFF* in the
display.
4. Press the Value key until you see the new value you want.
5. Press the Enter key to select the new setting. An asterisk appears next to
the value to show that it is now active.
6. To restore the printer to READY status, press the Online key.
Notes:
1. Values set in print jobs by the print application or by the printer driver
override values you set at the printer. If a print job specifies simplex
printing and the printer default is duplex, the printer honors the print job
setting and prints on one side only.
2. The BINDING item on the Paper Menu lets you specify how you want
duplex jobs to print. If BINDING is set to LONG (the default value), the
job prints as if the paper is to be bound along the long edge of the paper
(on the left for portrait documents, along the top for landscape
documents.) If you set BINDING to SHORT, the job prints as if the paper
is to be bound along the short edge of the paper (on the top for portrait
documents, on the left for landscape documents).
Canceling a Print Job
Situation: You want to cancel the job that is currently printing.
Action:
1. Press the Online key to take the printer offline.
2. Press the Cancel Print key. The current job will be canceled and removed
from the queue after the printer completes the pages in the buffer.
3. To restore the printer to READY status, press the Online key.
Printing the Ethernet Network Interface Card Configuration Page
Situation: You want to print the configuration page for the Ethernet network
interface card.
1. If the printer is online, press the Online key to take it offline.
28
Infoprint 32 and Infoprint 40: User's Guide
Advertisement
Table of Contents
