IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual page 129

User guide
Table of Contents

Advertisement

IPDS Menu Item
PRINT MODE
CACHING
EARLY COMPL
IPDS PORT
Value
ENH*
v ENH (ENHANCED)—the printer prints at 600 DPI which
STD
v STD (STANDARD)—the printer prints at 300 DPI which
Notes:
1. To specify an IPDS resolution of 240, 600, or AUTO, you
2. If you change PRINT MODE, power off and then power
ON*
Specifies whether or not to use caching for repeated
OFF
overlays.
v ON—the printer uses caching, which provides better
v OFF—the printer does not use caching, which requires
Note: Overlay caching is recommend for repeated overlays.
Overlay caching does not improve performance with
non-overlay IPDS data or overlays that are used only once
or infrequently.
OFF*
Turns early print completion on or off for IPDS data sent
ON
over the twinax attachment. To turn early completion on or
off for non-IPDS data over the coax attachment, use the
EARLY COMPL item on the Coax Setup Menu. EARLY
COMPL displays on the IPDS Menu only when the twinax
network card is installed.
v OFF—the printer waits until the job is physically
v ON—the printer signals the host that the job is complete
Setting EARLY COMPL=ON may improve print
performance, but may also degrade recovery and cause lost
data from some printing problems, such as jams.
COAX*
Specifies the attachment you use for IPDS jobs.
TX
Note: You can print IPDS from more than one port; setting
TRING
this item, therefore, does not restrict you from printing from
ETHER
multiple ports.
produces optimal print quality and slower printer
performance.
produces good print quality and optimal printer
performance.
must set PRINT MODE to ENH. (Use the RESOLUTION
item on the IPDS Menu to specify the IPDS resolution.)
on the printer for the new value to take effect.
performance for jobs with repeated overlays, but uses
more memory.
less memory but provides less performance for jobs with
repeated overlays.
complete to signal the host that the job is complete.
as soon as the IPDS data is formatted.
Description
Chapter 6. Operator Panel Menus
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Infoprint 32Infoprint 40

Table of Contents