Table of Contents
Advertisement
220 PAPER ERROR / SOURCE TRAY, A
221 PAPER JAM / AREA A, TRAY 1
222 PAPER JAM / AREA B, TRAY 2
223 PAPER JAM / AREA A
230 PAPER JAM / TONER CART
231 PAPER JAM / AREA A, TRAY
246
Infoprint 32 and Infoprint 40: User's Guide
Action: Remove jammed paper from area B. Open Tray 3 and remove
jammed paper. Make sure the paper is loaded correctly and the paper
guides are adjusted for the paper size. Close Tray 3. See "Clearing
2500-Sheet Input Unit Jams" on page 86.
Meaning: Paper has jammed in area A.
Action: Open the duplex unit (if installed) and Cover A. Remove
jammed paper from the paper path. Close Cover A and the duplex
unit. Check the source tray and make sure the paper is loaded
correctly and the paper guides are adjusted for the paper size. Make
sure the paper in the tray is the same length as the paper requested
by the job. See "Clearing Exit Area Jams" on page 74.
Meaning: Paper has jammed in area A or in the Tray 1 area.
Action: Open the duplex unit (if installed) and Cover A. Remove
jammed paper from the paper path. Open Tray 1 and remove jammed
paper. Make sure the paper is loaded correctly and the paper guides
are adjusted for the paper size. Close Tray 1. See "Clearing Paper Tray
Area Jams" on page 77.
Meaning: Paper has jammed in area B or in the Tray 2 area.
Action: Remove jammed paper from area B. Open Tray 2 and remove
jammed paper. Make sure the paper is loaded correctly and the paper
guides are adjusted for the paper size. Close Tray 2. See "Clearing
Paper Tray Area Jams" on page 77.
Meaning: Paper has jammed in area A.
Action: Open the duplex unit (if installed) and Cover A. Remove
jammed paper from the paper path. Close Cover A and the duplex
unit. See "Clearing Paper Tray Area Jams" on page 77.
Meaning: Paper has jammed in area A or the toner cartridge area.
Action: Open the duplex unit (if installed) and Cover A. Remove
jammed paper from the paper path. Close Cover A and the duplex
unit. See "Clearing Exit Area Jams" on page 74.
Meaning: Paper has jammed in area A or in the Face-Up Output Bin.
Advertisement
Table of Contents
