Test Menu Item
RESET IPDS FONTS
Reset Menu
Use the Reset Menu to cancel print jobs or to restore printer settings to the
factory defaults.
Notes:
1. To perform the action associated with the menu item you select, press the
Enter key.
2. If you are unfamiliar with using the operator panel to work with menus,
please read "Using the Operator Panel Keys" on page 23 and "Navigating
Menus" on page 24 before continuing.
Reset Menu Item
RESET PRINTER
94
Infoprint 32 and Infoprint 40: User's Guide
Description
Purges all IPDS captured fonts. This item is available only when IPDS is
installed and is inactive.
Note: This item is intended for use only after the following error message:
854 IPDS DATABASE ERROR
If you get this error, do the following:
1. Power off the printer, wait 20 seconds, and then power on the printer.
2. Select RESET IPDS FONTS from the Test Menu.
3. Power off the printer again, wait 20 seconds, and then power on the
printer.
Description
Cancels the current print job.
Notes:
1. Before you use RESET PRINTER, try canceling the job from the operator
panel.
a. Press the Online key.
b. Press the Cancel Print key. The current job will be canceled and
removed from the queue after the printer completes the pages in the
buffer.
c. To restore the printer to READY status, press the Online key again.
2. RESET PRINTER is not available while you print over the twinax or
coax attachments, or when you print IPDS jobs.