Table of Contents
Advertisement
Notes:
1. Stapling is available for all paper sizes, excluding UNIV (Universal). A5,
Statement, and Executive must be loaded long-edge first (LEF) for stapling
to be available.
2. Single-sheet jobs are not stapled.
3. If a print job requests staples and the 2000-Sheet Finisher is not installed,
the printer ignores the request.
4. The printer cannot staple jobs that contain both simplex and duplex sheets.
This limitation may affect some IPDS jobs; it should not affect PCL or
PostScript jobs, which are entirely simplex or entirely duplex.
5. You can stack approximately 48mm or 600 sheets, in up to 100 stapled
sets. (Results vary somewhat depending on paper characteristics such as
thickness and weight.) For example, you can staple up to 12 sets of 50
sheets or 30 sets of 20 sheets, but you cannot staple more than 100 sets
even if the total page count would be less than 600.
Chapter 4. Paper Handling
71
Advertisement
Table of Contents
