Loading Envelopes Into The Auxiliary Tray - IBM 4332-004 - InfoPrint 40 B/W Laser Printer User Manual

b. Use the IPDS Menu to set the Custom Form item to the custom form
See "Defining Custom Form Sizes for IPDS" on page 68 for more
information.
4. Load paper short-edge first.

Loading Envelopes into the Auxiliary Tray

Many applications allow you to specify the input tray you want to use.
This value will override any value set at the printer. If your application
does not let you pick an input tray, use the Paper Menu to select the
tray.
To select the auxiliary tray, set SOURCE to AUXTRAY (see "Selecting the
Default Input Tray" on page 64).
You can use the auxiliary tray to print Monarch, COM10, C5, and DL
envelopes. You can print universal envelopes from the envelope feeder. See
"Loading Universal Envelopes into the Envelope Feeder" on page 62 for
information.
Use the following procedure to load envelopes into the auxiliary tray:
1. See "Selecting Paper and Other Printable Material" on page 34 for
information on envelopes you can load.
2. Press the VALUE key to display the size envelope you are going to load.
3. Press the ENTER key to select the envelope size.
4. Place a stack of up to 4 envelopes along the right side of the auxiliary tray
with the flaps folded, long-edge first, and flap-edge first if the flaps are on
50
Infoprint 32 and Infoprint 40: User's Guide
you want to use.
Note