Table of Contents
Advertisement
Paper Menu Item
AUXTYPE
AUXSIZE
ENVTRAYPROT
ENVSIZE
Custom Forms Menu (IPDS)
Use the Custom Forms Menu to define custom paper sizes for IPDS jobs. The
following table describes the settings you can change from the Custom Forms
Menu. An asterisk (*) next to a value in the table indicates the factory default.
Value
PLAIN*
Specifies the type of media in the tray: plain paper,
PREPUN
pre-punched paper, transparencies, or labels.
TRANS
LABEL
LTR-LEF*
Defines the paper or envelope size being used in the
LTR-SEF
auxiliary tray. LEF means long-edge feed. SEF means
LEGAL
short-edge feed. For more information about loading paper
FOLIO
in the auxiliary tray, see "Loading Paper into the Auxiliary
11X17
Tray" on page 45.
A4-LEF
A4-SEF
JB5-LEF
JB5-SEF
B4
A5
A3
EXEC
STATMNT
HAGAKI
MONARCH
COM10
C5
DL
UNIV
OFF*
Specifies whether or not to include the envelope feeder in
ON
the auto-switching sequence. If a tray is not in the
auto-switching sequence, its paper will not be selected
when another tray runs out of paper.
v OFF—include the tray in the auto-switching sequence.
v ON—do not include the tray in the auto-switching
COM10*
Defines the envelope size being used in the envelope tray.
C5
DL
MONARCH
UNI-ENV
sequence.
Description
Chapter 6. Operator Panel Menus
101
Advertisement
Table of Contents
