Setting Network Security Parameters - Cisco AIR-PCI340 Installation And Configuration Manual

Chapter 5 Configuring the Client Adapter
Table 5-5
Parameter
Beacon Period (K s)
Go to the next section to set additional parameters or click OK to return to the Profile Manager screen.
On the Profile Manager screen, click OK or Apply to save your changes.

Setting Network Security Parameters

The Network Security screen (see
adapter associates to an access point, authenticates to the wireless network, and encrypts and decrypts
data. To access this screen, select the Network Security tab from the Properties screens.
Figure 5-5
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Advanced (Ad Hoc) Parameters (continued)
Description
Specifies the duration between beacon packets, which are used to help
clients find each other in ad hoc mode.
Range: 20 to 976 K s
Default: 100 K s
Figure
Network Security Screen
5-5) enables you to set parameters that control how the client
Setting Network Security Parameters
5-21