Cisco AIR-PCI340 Installation And Configuration Manual page 52

Installing or Upgrading the Client Adapter Software
Table 3-2
Component or Parameter
Program Feature Overrides Determines which ACM components are enabled. If any components
Menu Options (Defaults)
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
3-18
Software Components and Their Parameters (continued)
Description
are not selected now and you later want to use them, you must run this
installation program again and enable them.
Components: See the table below
Options per component: Enable or Disable
Default per component: Enable
Component
About Box (Help)
Exit Program
Launch Aironet Client
Utility
Troubleshooting
Preferences
Turn Radio On/Off
Reauthenticate
Select Profile
Auto Profile Selection
Other Configuration
Application
Show Connection Status Provides information on the current status
Determines which options are displayed on the ACM pop-up menu.
Menu options: About Box (Help), Exit Program, Launch Aironet
Options per menu option: Show or Hide
Default per menu option: Show
Chapter 3
Description
Displays the ACM version number and
enables you to access the online help.
Closes ACM for all client adapters.
Activates ACU, if it is installed.
Activates the troubleshooting utility,
which enables you to identify and resolve
configuration and association problems
with your client adapter.
Enables you to determine when ACM runs
and to select the options that appear on the
ACM pop-up menu.
Turns the client adapter's radio on or off.
Forces your client adapter to try to
reauthenticate using the username and
password of the current profile.
Enables you to select the active profile for
your client adapter.
Causes the client adapter's driver to
automatically select a profile from the list
of profiles that were set up in ACU to be
included in auto profile selection.
Enables an application other than ACU to
configure the client adapter.
of your client adapter.
Client Utility, Troubleshooting, Turn Radio On/Off,
Reauthenticate, Select Profile, Show Connection
Status
Installing the Client Adapter
OL-1394-07