Cisco AIR-PCI340 Installation And Configuration Manual page 41

Chapter 3 Installing the Client Adapter
Table 3-1
Component or Parameter
Place Icon on Desktop
Allow Non-Administrator
Users to Save Settings to
the Registry
Aironet Client Monitor
Installation Path
Program Folder
Auto Start
Start After Install
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Software Components and Their Parameters (continued)
Description
Causes the installation program to add an ACU icon to your
computer's desktop to provide quick access to the utility.
Options: Yes or No
Default: Yes
Enables users without administrative rights to modify profiles in ACU
and save them to the registry on computers running Windows 2000 or
XP.
Options: Yes or No
Default: Yes
Note
Installs the ACM version included in the Install Wizard file.
Default: Checked
Determines the path where the ACM software will be installed. You
can change the default by entering a new path.
Default: C:\Program Files\Cisco Systems\Aironet Client Monitor
Determines the program folder where the ACM software will be
installed. You can change the default by entering a new folder name.
Default: Cisco Systems
Determines whether ACM starts automatically every time Windows
boots.
Options: Yes or No
Default: Yes
Note
Determines whether ACM starts automatically after ACM is installed.
Options: Yes or No
Default: Yes
Note
Installing or Upgrading the Client Adapter Software
This option is not available for Windows 98, 98 SE, and Me
because these versions of Windows do not support different
classes of users.
If you select No, you can later activate ACM by using
Windows Explorer to find the path where the ACM software
is installed and double-clicking ACUMon.exe.
If you select No, you can later activate ACM by using
Windows Explorer to find the path where the ACM software
is installed and double-clicking ACUMon.exe.
3-7