Using Eap-Sim; If You Are Prompted For The Pin - Cisco AIR-PCI340 Installation And Configuration Manual

Wireless lan client adapters
Table of Contents

Advertisement

Chapter 6
Using EAP Authentication

Using EAP-SIM

After you (or auto profile selection) select a profile that uses host-based EAP authentication and you
configure the card in Windows (provided Windows is using the Microsoft 802.1X supplicant) for
EAP-SIM authentication, the authentication process varies depending on the configuration option you
selected for the SIM card's PIN.

If You Are Prompted for the PIN

If you chose to be prompted for the PIN after a power-up or reboot or at every authentication request,
follow the steps below to EAP authenticate.
Note
These instructions are applicable after profile selection, card ejection and re-insertion, reboot, or logon.
Perform one of the following:
Step 1
Figure 6-16 Enter PIN Screen
Step 2
Enter your PIN and click OK. The computer now retrieves information from the SIM card. If you enter
the PIN incorrectly, an error message appears.
Note
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
If your computer is running Windows 2000, the Enter PIN screen appears (see
If your computer is running Windows XP, a pop-up message appears above the Windows system tray
informing you that you need to enter your credentials to access the network. Click this message. The
Enter PIN screen appears (see
If you exceed the maximum number of retries for entering the PIN, the card locks up.
Figure
6-16).
Using EAP-SIM
Figure
6-16).
6-21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aironet 340Aironet 350Aironet cb20a

Table of Contents