Cisco AIR-PCI340 Installation And Configuration Manual page 106

Setting Network Security Parameters
Note
Note
Step 3 Click the Configure LEAP button. The LEAP Settings screen appears (see
Figure 5-7
Select one of the following LEAP username and password setting options:
Step 4
• Use Temporary User Name and Password—Requires you to enter the LEAP username and
password each time the computer reboots in order to authenticate and gain access to the network.
• Use Saved User Name and Password—Does not require you to enter a LEAP username and
password each time the computer reboots. Authentication occurs automatically as needed using a
saved username and password (which are registered with the RADIUS server).
Note
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-36
The LEAP option is available only if you selected the LEAP security module during installation.
When you select this option, dynamic WEP (if WPA is disabled) or TKIP (if WPA is enabled)
is set automatically.
LEAP Settings Screen
The Use Saved User Name and Password option is available only if the Allow Saved LEAP
User Name and Password option was enabled (set to Yes) during installation.
Chapter 5 Configuring the Client Adapter
Figure 5-7).
OL-1394-07