Cisco AIR-PCI340 Installation And Configuration Manual page 101

Chapter 5 Configuring the Client Adapter
Table 5-6
Security Feature
If using Windows XP
to configure card
EAP-SIM authentication
If using ACU to
configure card
If using Windows XP
to configure card
EAP-SIM authentication with WPA
If using ACU to
configure card
If using Windows XP
to configure card
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Client and Access Point Security Settings (continued)
Client Setting
Enable WPA and select Enable
network access control using IEEE
802.1X and PEAP as the EAP Type
Enable Host Based EAP (802.1x)
and Dynamic WEP in ACU and
select Enable network access
control using IEEE 802.1X (or
Enable IEEE 802.1x authentication
for this network) and SIM
Authentication as the EAP Type in
Windows
Select Enable network access
control using IEEE 802.1X and
SIM Authentication as the EAP
Type
Enable Wi-Fi Protected Access
(WPA), Host Based EAP (WPA),
and Dynamic WEP in ACU and
enable WPA and select Enable
network access control using IEEE
802.1X and SIM Authentication as
the EAP Type in Windows
Enable WPA and select Enable
network access control using IEEE
802.1X and SIM Authentication as
the EAP Type
Setting Network Security Parameters
Access Point Setting
Select a cipher suite that includes
TKIP; set up and enable WEP; and
enable WPA and Open
Authentication for the SSID and
specify the use of EAP
Note To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
Set up and enable WEP and enable
Open Authentication for the SSID
and specify the use of EAP
Set up and enable WEP and enable
Open Authentication for the SSID
and specify the use of EAP
Select a cipher suite that includes
TKIP; set up and enable WEP; and
enable WPA and Open
Authentication for the SSID and
specify the use of EAP
Note To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
Select a cipher suite that includes
TKIP; set up and enable WEP; and
enable WPA and Open
Authentication for the SSID and
specify the use of EAP
To allow both WPA and
Note
non-WPA clients to use the
SSID, enable optional
WPA.
5-31