Cisco AIR-PCI340 Installation And Configuration Manual page 39

Chapter 3 Installing the Client Adapter
Step 16 Follow the steps below to make selections on this screen.
a. Make sure a check mark appears beside every software component that you want to install. For every
component that is checked, the Install Wizard will install its version of that component. Every
component that is not checked will remain as it currently is on your system.
Note
Note
Click the + sign beside each component to view additional parameters. The current value of each
b.
parameter appears in the Value field.
c. To change the value of any parameter, click its current value in the Value field. A screen appears that
lets you change the existing value.
Enter or select a new value and click OK.
d.
and lists any default value.
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-07
Click the + sign beside the Security Modules option to reveal the available security
components.
Some components are dependent on others. Therefore, when you select or deselect these
components, the settings of other components may change. A dependency notice appears
when this occurs.
Installing or Upgrading the Client Adapter Software
Table 3-1 describes each component and its parameters
3-5